ISO 9001 : 2015 Certified Company

Contact us

Sewage Cement Pipe

We are manufactured using highest quality aggregates our batching and mixing procedures are fully computerized producing low water to cement ratio, high strength, concrete. Reinforcement cages required for the Spigot & Socket pipes are produced from Cold Drawn High Tensile Steel on our automatic welding machines.

ISO 9001 : 2015 Certified Company
Classification & Recommended locations for placements:
Class Description Conditions Where Normally Used
NP-2 Reinforced Concrete, Light Duty Pipes For Drainage and Irrigation use, for Cross Drains/Culverts Carrying Light Traffic.
NP-3 Reinforced Concrete, Medium Duty, Pipes For Drainage and Irrigation use, for Cross Drains/Culverts Carrying Medium Traffic.
NP-4 Reinforced Concrete, Heavy Duty, Pipes For Drainage and Irrigation use, for Cross Drains/Culverts Carrying Heavy Traffic.
Flush Joints
Sr. No. Class & Type of Ends Size(With ISI Mark)
01 Class NP-2 (Flush Joints) 150MM to 1200MM
02 Class NP-3 (Flush Joints) 150MM to 1200MM
03 Class NP-4 (Flush Joints) 150MM to 1200MM
Spigot & Socket Type Pipe (S&S)
Sr. No. Class & Type of Ends Size(With ISI Mark)
04 Class NP-2 (S&S Type) 150MM to 1600MM
05 Class NP-3 (S&S Type) 150MM to 1800MM
06 Class NP-4 (S&S Type) 150MM to 1800MM

Quality Control & Testing

The pipes are tested at the place of manufacture to ensure that they are adequate for the purpose intended. The Standard on a daily basis by our Quality Control Team and are audited regularly with the current Standard.

keyboard_arrow_up
Quick Inquiry
close slider